KOHJINSHA KL-1, Instruction Manual

Page: 7 / 48

２．Main Unit
2-5 Rear Panel（Lower Part）
⑩ Fuse
5A and 3A fuses are used.
Once fuse is blown, resolve the cause first, and then reinstall the same value of fuse.
⑪ Circuit Breaker
Circuit Breaker is tripped by equipment as soon as it detects failure of KL-1 like short
circuit or over current. Rated current is 50A.
Push up the lever of the circuit breaker until you hear the click noise after you fix the
trouble.
⑫ Primary AC Power Connection Terminals
Apply primary AC200V(220,230,or 240V) to this３Ｐ terminal. Use thicker that
AWG#8.
Cable. Center is for GND connection. Apply AC to both side.
⑬ Ventilation Hole
This is for KL-1 to intake outside air. Don ʼ t block this with anything.
- 6 -