KOHJINSHA KL-1, Instruction Manual

Page: 6 / 48

２．Main Unit
2-４ Rear Panel(Upper Part)
⑤ ANT Connectors(Output)
There are six antenna connectors to use
type-M(PL-259) connector. You can select
which
output to use from the controller.
⑥ GND terminal
Use this terminal to connect KL-1 to a good
earth
ground for safety.
Good earth ground should prevent electric
shock
accident or RF interferences.
Use a earth lug supplied with KL-1.
⑦ INPUT Connector
This is to connect with your transceiver(transmitter)
RF out terminal.
Use the 7m coaxial cable that is supplied with KL-1 to get optimum performance.
⑧ REMOTE
This Amphenol 5OP is to connect with the controller by using 7m accessory cable that
is supplied with KL-1..Push in firmly and make sure to lock it.
⑨ Ext ANT Selector
Use this connector to connect Ext Antenna Selector(Option)
- 5 -