KOHJINSHA KL-1, Instruction Manual

Page: 10 / 48

３．Controller
３-２ Rear Panel
① RS232C Connector
This is used to connect with the radio that has RS232C interface.
Use RS232C straight cable.
② PC ⇔ RIG Switch
You can control KL-1 from either PC or transceiver.
Use this switch to select your favorite way.
③ USB Terminal
This is to connect with your PC.
Just connect with your PC. KL-1 works without drivers.
④ CI-V Terminal
You can connect with ICOM radios using this terminal. Use cable with 2p plug.
⑤ SteppIR Terminal
When you connect with SteppIR, use this terminal.
Use the cable to use for this purpose.（2Pプラグ・D-Sub9P）
More description regarding this cable in page 33.
⑥ REMOTE Connector
For Amphenol 50P connector with the supplied 7m connection cable.
Push the connector to the end and make sure if it is locked.
⑦ TX CONT
Connect with your transceiver ʼ s remote terminal(TX GND).
⑧ GND Terminal
Use this terminal to connect KL-1 to a good earth ground for safety.
Good earth ground should prevent electric shock accident or RF interferences.
Use an earth lug supplied with KL-1.
- 9 -