KOHJINSHA KL-1, Instruction Manual

Page: 27 / 48

８．Controller Programming
Setting Item Setting Details
03 : Logging Soft 00：Not Use
01：CT/ARCP-2000
02：Zlog
03：HAM Log
04：Logger32
05：Mixw2
06：FTC Logger
07：FTC Logger CT
・Control from your PC（by logging software）
ICOM → 00：Not Choose this setting to use logging software
YAESU → 01 〜 05 choose your logging software
KENWOOD → 01 〜 05 choose your logging software
・Control from your rig
ICOM → 00：Not Use Choose this setting to use logging software
YAESU → 06：FTC Logger
HAMLOG、ZLOG、Logger32、Mixw2
07：FTC LoggerCT
LoggerCT
KENWOOD → 00：Not Use
Next you need to setup 00:Exciter Type.
005：KWD/K2/K3̲AI or 007：TS950/TS850̲AI
for HAMLOG、Zlog, CT
004：KWD/K2/K3̲IF or 006：TS950/TS850̲IF
for Logger32 と Mixw2
07 : Port2 BAUD SteppIR
001：1200 〜 016：19200（Factory Setting 008：9600）
SteppIR default 9600bps
- 26 -