KOHJINSHA KL-1, Instruction Manual

Page: 15 / 48

７．Controller Settings and Connections
7-2 Jumper Pin Settings and Connection for Different Transceivers
In this section we show jumper pin settings and cable for connection with different
transceivers.
■ shows jumper pin position.
■ doesn
’
t effect settings with or without jumper pin.
Each figure ʼ s bottom side is front side of the controller.
（※）You can not have both RS-232C connector and CI-V connector on the rear
panel of KL-1. If you have both connectors, control function doesn ʼ t work. You
should use either interface.
- 14 -