KOHJINSHA KL-1, Instruction Manual

Page: 5 / 48

２．Main Unit
2-1 Front Panel
① Power Indicator
KOHJINSHA logo turns on with GREEN light when you
connect AC plug with AC200V(220V, 230V, or 240V)
and turn on the circuit breaker on the lower part of rear
panel.
When you turn on by pressing POWER switch on the
controller, the KOHJINSHA logo turns RED, which means
you have high voltage on the tube.
2-2 Side Panel(Left and Right)
②③ Snap Fastener
These are used when you need to remove side panels.
Push down the hooks to unlock, then lift a panel to
remove it.
2-3 Upper Panel
④ Ventilation Hole
Hot air comes out of this hole to keep the tube proper
temperature. Don ʼ t block air flow at anytime.
Otherwise you may give damage the tube.
- 4 -