Koganei MSU-PH-EA Series Owner'S Manual Download Page 13

Page: 13 / 20

- 13 -

Setting Mode Selection

△▽

[Measuring Mode]

For checking the version and initializing to factory default
settings.

For selecting a sensor head, configuring the settings of
any sensor, and specifying the sensor input channel.

For specifying the output mode, selecting output
inversion, and changing the reference import mode.

For configuring threshold (L1, L2) settings, hysteresis (H1,
H2) settings, and the reference import

L setting, and for

checking the threshold value for the reference import mode.
For configuring the switch output ON delay setting and
filter setting.

For configuring the LED light setting, backlight color
setting, and display refresh interval setting.

For selecting the external input function assignment.

For switching the hold setting (peak hold, bottom hold).

For executing zero adjustment, clearing zero adjustment,
and specifying the zero adjustment save location.

For configuring the communication speed setting and
communication compatibility settings (RS-232 Type only).
* When there is no communication function, "9. SCo"

does not appear.

Information

Sensor

Output

Threshold

Response

Display

External Input

Hold

Zero

Adjust

Serial Communication

…

* * * *

△▽

* Pressing and holding the button on the setting mode selection screen takes you back to measurement mode.

If "CH1" to "CH4" is selected, do the settings for the channel you want.

If "SEQU" is selected, choose channel 1 through channel 4 in order using the button. When you have finished up to channel 4, return to

the settings mode selection screen.

If "ALL" is selected, do settings with the same values for all channels 1 through 4. In this case, the current value to be referenced is channel 1.

■

: unlit;

□

: lit

The setting values for the settings of each parameter are set by pressing the button.

When doing settings, pressing and holding the button takes you back to the previous screen.

Summary of Contents for MSU-PH-EA Series





















Search results

Summary of Contents for MSU-PH-EA Series

Reviews:

Brands by name

Popular brands

Koganei MSU-PH-EA Series, Owner'S Manual

Search results

Summary of Contents for MSU-PH-EA Series

Reviews:

Brands by name

Popular brands