Kogan KAGMHS35G8A, User Manual

Page: 7 / 12

Range of application and operating instructions
1. The standard 3.5mm jack on this headset is T/R/S (tip, ring, sleeve) design, with full
microphone and left/right stereo headphone response possible from the one input.
2. The splitter cable is not required unless using with a PC with separate
headphone/microphone ports.
3. When using the headset on computer, please make sure the headset microphone
switch is turned on; then make sure the computer microphone switch is turned on.
Please find the "speaker" icon in the computer taskbar and double-click to enter the
volume control for settings. Then enter into the "voice" for settings on the "Control
Panel".
4. Ensure the headset volume adjustment button is at a medium volume and can be
adjusted higher or lower to appropriate volume.
Operating instructions
Connecting to PC with separate headphone/microphone ports
1. Connect the Splitter cable with the 3.5mm jack for this headset to work on PC with
separate headphone/microphone ports.
2. Double check to ensure the inputs are correct (Microphone jack into Microphone
port, etc.)
3. Ensure the headset’s microphone is not muted or disabled.
•
Find the "Speaker" icon in the computer taskbar and double-click to enter the
volume control for settings.
•
Enter the "Voice" for setting on the "Control Panel"
•
Control Panel > Sound > Recording > right click and select "Show Disabled
Devices." Microphone should appear in the box now.
•
Click on Microphone and select "Enable".
4. Try disabling “Front mic" on recording devices. Update the Sound Card Drivers.3.
Adjust or rotate the 3.5mm interface until both sides of the headphones have
smooth sound output.
5. Adjust or rotate the 3.5mm interface until both sides of the headphones have
smooth sound output
OPERATION