Kofax Image Products VirtualReScan 4.0, Installation Manual

Page: 77 / 116

VRS Installation Guide 65
Create or Configure a Scan Source
A scan source associated with your Adrenaline SCSI scanner controller must be
selected each time you use your scanning application.
If you selected the name of your scanner from the list presented during the Adrenaline
SCSI scanner controller installation process, a scan source called “XYZ Scanner without
VRS” (where “XYZ Scanner” corresponds to the name of your scanner) will already be
installed and available for selection from your scanning application. If desired, you can
use the Kofax Source Manager to update the configuration settings for this source. For
instructions, refer to Appendix A,
Creating or Configuring a Scan Source on page 79.
If your scanner did not appear on the list presented during the installation process, you
should have selected the “I will configure my scanner later” check box. In this case,
you will need to use the Kofax Source Manager (KSM) to create a scan source for use
with the scanner and your Adrenaline SCSI scanner controller. For instructions, refer
to Appendix A,
Creating or Configuring a Scan Source on page 79.
Note
When using an Adrenaline 450 or 650 scanner controller without VRS, you
cannot successfully use a VRS or AIPE source without obtaining an additional license.