Kofax Image Products VirtualReScan 4.0, Installation Manual, Page: 101 / 116

VRS Installation Guide 89
Appendix B
VRS Non-Interactive Mode
Introduction
During the installation process, you can set VRS to run in non-interactive mode with
certain scanners. This mode is intended for users who do not wish to see the VRS user
interface while scanning, even though VRS is running in the background.
If you set VRS to run in non-interactive mode, you have the option of switching it back
to interactive mode, as explained below.
X
To switch a scanner from non-interactive mode to interactive mode
1
Right-click on the VRS taskbar icon.
2
Select QC Modes | On Errors, which will have the effect of turning off non-
interactive mode.
3
In addition, you may want to use the VRS Administration Utility to update the
settings that affect VRS responses to hardware problems. For more information,
refer to Chapter 3 of the
VRS User’s Manual .