Kofax Image Products VirtualReScan 4.0, Installation Manual

Page: 47 / 116

VRS Installation Guide 35
Install the SCSI Scanner Controller
This section describes how to install a SCSI scanner controller in your computer. If you
will not be using a SCSI scanner controller, skip this section and proceed to
Attach the
Scanner on page 37.
X
To install the SCSI scanner controller
1
Shut down your computer and unplug the power cord.
2
Do one of the following:
• If you are using a Kofax Adrenaline 450, 650, or 650i SCSI scanner controller,
refer to Installing an Adrenaline SCSI Scanner Controller on page 55.
• If you are using a non-Kofax SCSI scanner controller, install it in your
computer according to the instructions supplied by the manufacturer.
3
Once the SCSI scanner controller has been installed, plug in the power cord and
start your computer.