Kofax Image Products VirtualReScan 4.0, Installation Manual, Page: 39 / 116

VRS Installation Guide 27
12
From the Activate VRS dialog box, you should make the following entries:
a
If necessary, you can update the entries in the User Identification section and
the Product Identification section. If desired, select the check box if you do
not want to receive Kofax product information via email.
b
The VRS installer will automatically detect and display your machine ID in
the appropriate field. You cannot edit the machine ID.
c
In the License Code section, click “Get License Code” to retrieve the code
from the VRS license server. Or, if you already have the license code, enter it
in the text entry field. As another option, leave the license code entry blank if
you intend to install VRS in evaluation mode. Refer to
Evaluation Mode on
page 30.
d
Click Activate. A confirmation message will display if the activation is
successful. If the installer is unable to connect to the VRS license server, the
“Activate - No Internet Connection” dialog box will display. For
instructions, refer to
Activating Your VRS License Without an Internet
Connection on page 33.
13
You will be notified when the VRS installation process is finished. When the
notification appears, click Finish.
14
When prompted, select the option to restart your computer now, and then click
Finish. Do not remove the VRS installation CD until the computer has been
restarted, because it is possible that scanner drivers may be installed after the
computer restarts. The scanner driver installation process may vary, according
to the scanner you selected earlier in the installation process.
15
Once the computer has been restarted and all scanner drivers have been
installed from the CD, remove the installation CD and store it in a safe place.