Kofax Image Products VirtualReScan 4.0, Installation Manual

Page: 17 / 116

VRS Installation Guide 5
completing the VRS installation, refer to Appendix A, Creating or Configuring a Scan
Source on page 79 to create a scan source for a non-certified scanner.
VRS Component Installers
During the VRS installation process, you are prompted to select the name of your
scanner from a list of certified scanners. The VRS installer uses the name of the certified
scanner to identify the appropriate drivers to install. Because the list of VRS-certified
scanners is updated on a continual basis, some scanners may not be certified in time to
be published in the list that is presented during the installation process. Drivers for
these unlisted certified scanners are made available as “VRS Component Installers,”
which you can download from the Kofax Web site after completing the VRS
installation process. To locate the appropriate VRS Component Installer for your
scanner, refer to the Downloads Library, which is available from the Support pages on
the Kofax Web site.
If you require a VRS Component Installer, complete the standard VRS installation
process according to the instructions in this guide (refer to
Install the VRS Software on
page 15). When prompted to select a scanner, select the “I will configure the scanner
later” check box. After the installation is finished, check the Kofax Web site to locate
and download the VRS Component Installer update with the drivers required for your
scanner.
VRS Component Installers are available only for scanners that have been certified for
use with VRS. Non-certified scanners can be used with VRS if they meet the
requirements outlined in
VRS Scanners: Certified vs. Non-Certified on page 4.