Koelstra BINQUE Daily, Instructions For Use Manual

Page: 22 / 32

MaMbo Daily
12
Attention!
• Do not attach any toys to the carrycot with a cord.
•
Check regularly whether your child is not too hot or cold.
• Check the handle and the bottom of the carrycot
frequently for damage and/or wear.
Tip
• The carrycot has supporting feet and can be used as a
cradle at home or while travelling, separate from the
pushchair.
• There are Drings at the bottom of the carrycot. If desired,
a set of straps or a harness can be attached to these.
1. Take all the carrycot parts out of the box.
2. Remove all packaging materials and discard immediately.
3. Use the ‘What's in the box?’ section to check if the
carrycot is complete (see p. 4).
3.2 Assembling the carrycot
1. Remove the padding and the mattress with the airflow
from the carrycot.
2. Tighten the two tension bars on the inside of the carrycot
so that the small protrusions engage the recesses at the
bottom (see fig. 22).
The carrycot's sides are now tight.
3. Slide the canopy's elbow pieces on to the carrycot's free
frame tubes (see fig. 23).
4. Check that both locking detents are fully visible.
5. Press the adjustment button on the right-hand side of
the canopy and with your other hand pull the canopy
upright (see fig. 24).
6. Fasten the press studs on the rear side of the canopy to
the press studs on the carrycot.
7. Attach the press stud on the canopy to the press stud on
the carrycot (see fig. 25).
8. Insert the padding in the carrycot with the Velcro at the
head end (see fig. 26).
9. Attach the padding zip to the longest zip on the carrycot.
10. Place the mattress in the carrycot smooth side down,
and the head end (the wider side) towards the canopy
(see fig. 26).
3.3 Using the mattress (carrycot)
Danger, risk of death!
• Never place an extra mattress on top of the mattress
supplied.
• The maximum allowed thickness of the mattress is
3 cm (centimetres).
• Check that the mattress is level. A mattress that has
moved can present a risk of suffocation.
Warning!
• Only use the mattress supplied by Koelstra.
Attention!
• Always use your own fitted sheet around the airflow and
mattress.
Tip
• The airflow can be washed at 60°C in the washing
machine.
• Before use, check that the airflow is wrapped around the
mattress with the ventilating side facing up.
• Always place the airflow on the chequered side of the
mattress.
3.4 Adjusting the canopy (carrycot)
1. Using your right hand, press the adjustment button on
the right hand side of the canopy (see fig. 24).
2. Use your left hand to push against the handle on the
canopy to fold the canopy, or pull it to unfold the canopy.
The canopy is locked as soon as you release the adjustment
button.
3.5 Installing the wind protector (carrycot)
Attention!
• Attention: Detach the Velcro of the wind protector from
the canopy before folding the canopy.
1. Place the canopy upright (see fig. 24).
2. Attach the zip on the wind protector to the shortest zip
(that is still available) on the carrycot.
3. Fasten the Velcro on the wind protector to the inside of
the canopy (see fig. 27).