Koelstra BINQUE Daily, Instructions For Use Manual

Page: 17 / 32

MaMbo Daily
7
1 Unpacking and assembling
1.1 Before first use
Danger, risk of death!
• Keep plastic packaging materials away from children
as they can present a choking hazard for children.
• Beware of small parts. Your child may swallow a small
part and choke.
•
Do not place any loose objects in the pushchair.
Warning!
• Before use, check your product for any damage, loose or
missing parts, sharp edges and/or protruding parts.
• Never exceed the maximum weight allowed in the
pushchair (see chapter 9 ‘Technical specifications’).
Caution!
• To prevent damage, do not remove logos or stickers.
Some logos and stickers are required by law.
Tip
• For environmental reasons, we recommend that you
dispose of the packaging at your local civic amenity site.
1. Take the pushchair and the remaining parts out of the
box.
2. Remove all packaging materials and discard immediately.
3. Use ‘What's in the box?’ to check if the pushchair is
complete (see p. 4).
1.2 Mounting the wheels
Caution!
• Always check that all the wheels have been fitted
correctly, as among other things, this is important for the
brake to function properly.
Assembling the swivel wheel (see fig. 1):
1. Take the wheel with the swivel wheel lock.
2. Remove the transparent protective cover from the axle
and discard this.
3. Take the parts out of the plastic bag that is attached to
the loose wheel.
4. Place a ring on the axle.
5. Slide the loose wheel on to the axle with the valve facing
outwards.
6. Place the remaining ring on the axle.
7. Squeeze the split pen through the opening in the axle.
8. Then fit the wheel cap in place on the axle with a click.
Installing the swivel wheel (see fig. 2):
1. Slide the assembled swivel wheel on the front leg of the
frame.
You will hear a click.
2. Check that the swivel wheel is securely attached.
To install the rear wheels:
1. Remove the transparent protective covers from the axles
of both rear wheels.
2. Slide the rear wheels in the rear axle as shown in figure 3
(note the direction of the profile on the tyres).
You will hear a click.
3. Check that the rear wheels are securely attached.
1.3 Unfold
Warning!
• Beware of any moving parts or hinges when unfolding,
folding or adjusting the pushchair.
• Keep your child at a safe distance. Beware of getting your
fingers or hands trapped, or those of your child.
Caution!
• Never use force if you experience resistance when folding
or unfolding the pushchair.
The frame has been folded, the wheels have been attached.
1. Engage the pushchair's parking brake (see section 2.6
‘Using the parking brake’).
2. Stand next to the pushchair.
3. Lift the push bar until the frame falls into the locking
mechanism on both sides (see fig. 4).
You will hear a click on both sides.
4. Rotate the push bar to the required position (see section
2.1 ‘Adjusting the push bar’ ).