Koden MDC-2200 series, Installation Manual

Page: 80 / 123

Chapter 5 Detailed setup and additional menu MDC-2200/2500 Series
5-18 0092625002-06
5.2 Additional menu
5.2.1 Input/output
5.2.1.1 Heading
5.2.1.1.1 Heading
This is used to choose (“On”) or not use (“Off”) heading information. Heading display disappears
with “Off” selection.
Setting value : On, Off
5.2.1.1.2 Input mode
This is used to specify selection of heading input sentence.
Setting value : Auto, THS, HDT, HDG, HDM, VTG, RMC, RMA, Manual
5.2.1.1.3 Manual setting
This is used to specify a manual value when “Manual” is selected with ”input mode”.
Setting value : 0.0° to 359.9°
5.2.1.1.4 Correction
This is used to specify manual correction value when “Manual” is selected in ”input mode” above.
Setting value : 0.0° to 359.9°
5.2.1.1.5 KGC-1 setting
This is used to specify setting value of KGC-1 (GPS Compass) at the time of connection.
Setting item : Initialize, Correction
Initialize : Cancel, Execute
Correction : 0.0° to 359.9°
5.2.1.2 Speed
5.2.1.2.1 Speed
This is used to specify connection to a speed input device (GPS Compass, etc,).
Setting value : Off, On
5.2.1.2.2 Input mode
This is used to specify selection of speed input sentence.
Setting value : Auto, VHW, VBW, VTG, RMC, RMA, Manual
5.2.1.2.3 Manual setting
This is used to specify manual setting value when “Manual” is selected in “Input mode” above.