Koden MDC-2200 series, Installation Manual

Page: 61 / 123

Chapter 4 Setup after installation MDC-2200/2500 Series
4-14 0092625002-06
4.7.4 Monitor connection
A Remote monitor displays the radar image by receiving the picture data, heading and bearing
data from the main Display unit. The monitor acts the same as that of the slave Display unit of
independent connection system. Note: when functions such as chart overlay, ATA, AIS,
stabilization criteria, TM and True trails are used, it is necessary that speed, heading and
latitude/longitude data are inputted into the monitor.
Setting example
(1) Press [MENU] key, select OPTION => INTERSWITCH => MONITOR using joystick and
indicate it by highlighted character.
(2) Press [ENTER] key to save.
Figure 4.8 Example of monitor connection
Monitor