MDC-2200/2500 Series
Chapter 4 Setup after installation
0092625002-06
4-15
4.7.5 Displaying antenna location on the screen
This displays the current location of Antenna unit. The purpose is to identify the Antenna unit being
displayed when inter-switch system is used with two radar systems.
Setting example
(1) Press [MENU] key, select OPTION => ANTENNA POSI => Upper using joystick and indicate
it by highlighted character.
(2) Press [ENTER] key to save.
“Upper” character string is displayed on the screen.
The locations such as PORT, STBD, FWD, MID, AFT, FWD PORT, FWD STBD, MID PORT,
MID STBD, AFT PORT, AFT STBD, UPPER, LOWER are selectable.
4.8 Switching antenna rotation speed, high/low
This function changes the antenna rotation to high speed (48 rpm) or low speed (24 rpm).
Setting example
(1) Press [MENU] key, select OPTION => MOTOR SPEED => Select range using a joystick and
indicate it by highlighted character.
(2) Press [ENTER] key to save.
High speed rotation (48 rpm) mode is applicable except for the range setting was done.
Summary of Contents for MDC-2200 series
Page 1: ......
Page 67: ...MDC 2200 2500 Series Chapter 5 Detailed setup and additional menu 0092625002 06 5 5 ATA EPA ...
Page 123: ......
