background image

A-61698  November 2010

B-1

Appendix B Warranty - US and Canada only 

Limited warranty for Kodak Scan Stations

Eastman Kodak Company provides the following Limited Warranty on 

Kodak

 Scan Stations (excluding spare parts 

and consumables) distributed by Kodak or through Kodak’s authorized distribution channels:

Kodak warrants that a 

Kodak

 Scan Station, from the time of sale through the Limited Warranty period applicable to 

the Product, will be free of defects in materials or workmanship and will conform to the performance specifications 
applicable for the particular 

Kodak

 Scan Station.

All 

Kodak

 Scan Stations are subject to the Warranty Exclusions described below. A 

Kodak

 Scan Station found to be 

defective or which does not conform to the product specifications will be repaired or replaced with new or 
refurbished product at Kodak’s option.

Purchasers may determine the applicable Limited Warranty period for the 

Kodak

 Scan Stations purchased by 

calling (800) 822-1414, or by visiting: http: www.Kodak.com/go/docimaging or by reviewing the Limited Warranty 
Summary Card enclosed with the 

Kodak

 Scan Station.

Proof of purchase is required to demonstrate eligibility for warranty service.

Warranty exclusions

Kodak’s Limited Warranty does not apply to a 

Kodak

 Scan Station that has been subjected to physical damage 

after purchase, caused, for example, by casualty, accident, acts of God or transportation, including (a) by a failure 
to properly package and ship the Scan Station back to Kodak for warranty service in accordance with Kodak’s then 
current Packaging and Shipping Guidelines, including failure to replace the shipping restraint prior to shipping, or 
by a failure to remove the shipping restraint prior to use; (b) resulting from the user’s installation, system 
integration, programming, re-installation of user operating systems or applications software, systems engineering, 
relocation, reconstruction of data, or removal of the product or any component (including breakage of a connector, 
cover, glass, pins, or seal); (c) from service, modification or repair not performed by Kodak or a service provider 
authorized by Kodak or by tampering, use of counterfeit or other non-Kodak components, assemblies, accessories, 
or modules; (d) by misuse, unreasonable handling or maintenance, mistreatment, operator error, failure to provide 
proper supervision or maintenance, including use of cleaning products or other accessories not approved by Kodak 
or use in contravention of recommended procedures or specifications; (e) by environmental conditions (such as 
excessive heat or other unsuitable physical operating environment), corrosion, staining, electrical work external to 
the product or failure to provide electrostatic discharge (ESD) protection; (f) by failure to install firmware updates or 
releases available for the product and (g) by such other supplemental exclusions published from time to time online 
at http: www.Kodak.com/go/docimaging or by calling (800) 822-1414.

Kodak provides no Limited Warranty for products purchased from countries other than the United States. 
Purchasers of products from foreign distribution channels must seek warranty coverage, if any, through the original 
source of purchase.

Kodak provides no Limited Warranty for products that are purchased as part of a third party manufacturer’s 
product, computer system or other electronic device.

Any warranty for these products is provided by the OEM (Original Equipment Manufacturer) as part of that 
manufacturer’s product or system.

The replacement product assumes the remainder of the Limited Warranty period applicable to the defective 
product or thirty (30) days, whichever is longer.

Summary of Contents for Scan station Pro 550








































Reviews: