DryView 8600 User Guide
5-16
8186546 2000 March Rev. B
Keypad Test
Before you can run a keypad test, a remote keypad must be attached to the imager.
To run a keypad test for one of the input modules :
1. From the Print SMPTE Pattern display, press
to access the Keypad Test
menu.
2. To start the Keypad Test, press
Enter
.
During the first part of the keypad test, the menu shows test progress.
3. When the first part of the test is complete, the menu prompts you to press any
key. To test individual key function, press each key in turn.
Each time you press a key, the menu should identify the pressed key.
Example: If you press
Erase
, the menu should show that you pressed it.
4. To cancel the test, press
Exit
. The system displays a “TEST CANCELLED BY
OPERATOR” message.
5. To return to the first Keypad Test menu, press
Exit
.
6. To perform the keypad test on the other input module, press
and repeat
steps 2 through 5.
Summary of Contents for Kodak DryView 8600
