Section 3 – Operation
3-7
2000 March Rev. B 8186546
Figure 3-4. Changing the Contrast Setting
Digital Modality with Remote Keypad
1. On the modality, select and display the image you want to use for printing
contrast samples.
2. On the DryView 8600 remote keypad, select a format other than 1. (For
example, use 2, 4, or 6.)
3. Press Acquire on the keypad.
4. On the local panel, press
A
Setup
or
B
Setup
to select the menu that represents the
host-controlled modality from which you will print contrast samples.
5. On the local panel, press
to go to item 3, Print Contrast Samples, and
then press
Enter
. (The DryView 8600 automatically prints 12 copies of the
previously acquired image at different contrasts.)
6. Select the image that you prefer, and note the image number associated with it.
7. On the local panel, press
to go to item 2, Contrast.
8. Following the instructions on the display, change the contrast setting to the
number previously selected from the contrast samples, then press
Enter
.
9. After setting the contrast, press
Exit
to return the DryView 8600 to service.
Summary of Contents for Kodak DryView 8600
