Kodak Kodak DryView 8600, User Manual

Page: 51 / 77

DryView 8600 User Guide
5-4
8186546 2000 March Rev. B
Message Operator Action
INPUT A (B) PROGRAM MEMORY FULL
PRESS ENTER TO CONTINUE
Press Enter to continue.
INPUT A (B) SYNC FAILURE (39)
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
INPUT A (B) UNDERFLOW FAILURE (62)
Try acquiring an image again. If problem
persists, call for service.
INSERT FILM TRAY (12)
Insert the film tray.
INSUFFICIENT MEMORY FOR IMAGE FILE A
(B) (81) PRESS ENTER TO CONTINUE
Press Enter to continue. As films are
printed, memory will become available.
INSUFFICIENT MEMORY FOR PRINTSET A (B)
(82) PRESS ENTER TO CONTINUE
Press Enter to continue. As films are
printed, memory will become available.
INVALID DATA RECEIVED FROM INPUT A (B)
(53) - PRESS ENTER TO CONTINUE
Call for service.
LAMP FAILED TO REACH TEMPERATURE (71)
PRESS ENTER TO LOAD DEFAULT GAMMA
TABLES
Call for service.
LASER BOARD FAILURE (46)
CALL SERVICE – PRESS ENTER TO
CONTINUE
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
LOADING DEFAULT GAMMA TABLES
Automatic operation. Verify image
quality.
LOCAL PANEL BUFFER OVERFLOW (85)
CALL SERVICE – PRESS ENTER TO
CONTINUE
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
LOCAL PANEL RAM FAILURE (73)
CALL SERVICE – PRESS ENTER TO
CONTINUE.
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
MAXIMUM DENSITY LESS THAN 3.5
No action required.
NO IMAGE ACQUIRED ON INPUT A (B) (68)
PRESS ENTER TO CONTINUE
Reacquire an image.
NON-VOLATILE CLOCK RAM FAILURE (96)
CALL SERVICE – PRESS ENTER TO
CONTINUE
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.