A-61500 January 2004
5-1
5
Maintenance
This chapter provides:
• a list of supplies and accessories
• a list of cleaning tools and materials
• procedures for opening the pod
• cleaning procedures for:
- paper path
- drive rollers
- feed module tires
- separation roller tires
- imaging guides
• replacement procedures for:
- feed module and tires
- separation roller and tires
- pre-separation pad
IMPORTANT: Scanner components marked with a green tab indicate
operator-accessible parts.
The scanner collects dust and other debris during routine scanning. It is
recommended that you thoroughly clean the scanner at least once a
week and the paper path daily if you are using the Document Printer or
if you are scanning carbonless paper or newsprint.
Depending on scanning volumes you may need to clean some parts
more frequently than others.
NOTES:
• Some debris from the rubber tires on the feed module and separation
roller is normal. Tire debris does not always mean that the tires are
worn or damaged. After cleaning, inspect the tires for wear and
replace the separation roller or feed module if necessary.
• A recommended cleaning sequence includes vacuuming inside the
scanner, cleaning the rollers with a Transport Cleaning Sheet,
cleaning any remaining residue from the feed module, separation
roller or drive rollers and cleaning the imaging guides.
• Using unapproved cleaning fluids or solvents may damage the
rubber tires.
