3-4
A-61837 June 2015
Installing the document
extender
• Insert the ends of the document extender into the holes on the input elevator
or the output tray and lower the extender into position.
Adjusting the output tray
for rear edge alignment or
improved or best document
handling
The
Kodak
i4250, i4650 and i4850 Scanners are designed with improved
stacking performance which allows most users to scan documents without the
assistance of the output tray side guides and document stop. With one or both
side guides down and the height adjustment tab raised, you can quickly and
easily remove the scanned documents from the front-, right- or left-side of the
scanner. Try using this method before using the side guides and document
stop with
Improved
or
Best Document Handling
enabled in the scanning
application or through the Operator Control Panel using the Application
Overrides function.
NOTE: If you find it more convenient to use the side guides and document
stop, see the next section for adjustment procedures.
•
Adjusting the angle of the output tray
— it is strongly recommended that
you scan documents with the
Improved
or
Best Document Handling
option enabled in the scanning application along with the angle of the output
tray in the “up” position to achieve best stacking performance. Just lift the
front of the output tray and the height adjustment tab will release from
underneath the output tray.
To lower the output tray, gently push the height adjustment tab underneath
the output tray while lowering the output tray on the printer access cover.
