Kodak I1410 - Document Scanner User Manual Download Page 12

Page: 12 / 162

A-61550 May 2007

Installing the

Kodak

Driver Software

Install the driver software

before

connecting the scanner to your PC.

1. Insert the

Kodak

i1400 Series Scanner Installation CD in the CD-

ROM drive. The installation program starts automatically.

NOTE: If the CD does not start automatically, open the My

Computer icon on your desktop. Double-click the icon for
your CD-ROM drive, then double-click on

Install Scanner

Software

2. Select

Install Scanner Software.

The following message may be

displayed,

Portions of this application are already installed.

Existing files will be upgraded as necessary. Continue with
installation?

If the message is displayed, click

Yes

The Welcome window will be displayed.

3. Click

Next

. The Software License Agreement window will be

displayed.

4. After reading the agreement, click

I Agree

to continue.

Summary of Contents for I1410 - Document Scanner



































































































































































Search results

Summary of Contents for I1410 - Document Scanner

Reviews:

Related manuals for I1410 - Document Scanner

Brands by name

Popular brands

Kodak I1410 - Document Scanner, User Manual

Search results

Summary of Contents for I1410 - Document Scanner

Reviews:

Related manuals for I1410 - Document Scanner

Brands by name

Popular brands