A-61550 May 2007
37
The procedures that follow describe how to configure a customized
Setting Shortcut. Complete descriptions of the features and options on
the
Kodak
Scanner window and tabs are found in the section entitled,
“The main
Kodak
Scanner window”.
NOTE: Setting Shortcuts can sometimes be overridden by your
scanning application. If this happens, the shortcut you call will
appear in the main
Kodak
Scanner window in italics with the
word <
Changed
> next to it. This is normal behavior for an
application that does not use Setting Shortcuts and downloads
its preferred individual settings to the scanner first and then
provides access to the TWAIN datasource.
When you click
OK
to begin scanning, you will be asked if you
want to save the changed settings. When using an application
that does not use Setting Shortcuts, select
No
to this prompt
and continue scanning.
Selecting Image
settings
From the main
Kodak
Scanner window:
1. Select a predefined Setting Shortcut from the Setting Shortcuts list.
Choose a Setting Shortcut that describes as closely as possible the
image output you desire.
2. Determine if you want to capture an electronic image of the front of
your document, back of your document or both sides of your
document and make the selection from the
Input document is
drop-
down list. Options are:
•
Two Sided
— captures both sides of the document
•
One Sided-Front
— captures the front side only
•
One Sided-Back
— captures the back side only
