Kodak EKTAPRO 7000 Quick Reference Manual Download Page 23

Page: 23 / 77

Quick Reference -- The ultimate reference for Kodak

EKTAPRO

Slide Projectors



by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5

Trays

Inserting Slides

General

BEFORE:

Check each slide’s orientation (horizontal or vertical), and arrange them in the order
you wish to show them.

Then turn the slide upside down.

Number each mount in the upper right-hand corner of the film’s shiny side.

Insert your first slide into the first slot in the tray so that the number is visible on the
outer circumference of the tray. Insert your second slide in the second slot with the
emulsion (dull side) facing your first slide, and so on.

AFTER

View each slide against a light source and orient for projection (check for proper
horizontal, vertical, right and left positioning.)

Arrange the slides in the order you wish to show them.

Rotate them 180 degrees -

upside down.

Number (or mark) each mount in the upper right-hand corner.

Insert the slides into the tray slots so that the number (or mark) is on the outer
circumference of the tray.

Summary of Contents for EKTAPRO 7000














































































Search results

Summary of Contents for EKTAPRO 7000

Reviews:

Related manuals for EKTAPRO 7000

Brands by name

Popular brands

Kodak EKTAPRO 7000, Quick Reference Manual

Search results

Summary of Contents for EKTAPRO 7000

Reviews:

Related manuals for EKTAPRO 7000

Brands by name

Popular brands