Kodak EKTAPRO 7000 Quick Reference Manual Download

Page: 27 / 77

Quick Reference -- The ultimate reference for Kodak

EKTAPRO

Slide Projectors



by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5

Switchable “no slide no light” feature

To switch off (and on again)
the “no slide no light feature”
input <550> and confirm with
<*>

No slide no light

Ektapro
4020, 5020, 7020
and 9020

No slide no light

means: If no slide is in the tray compartment (and therefore, in the slide

gate of the projector) the shutter will not open. No disturbing white light will interrupt your
presentation.

IR Remote System RA

CAT No 712 1072

and RA/LP

CAT No 712 1064

IR Receiver

Note

There are two reasons to switch off this feature:

1. High IR-transmissive slide mounts

There are some mounts on the market which do not
reflect IR radiation. That means they cannot be de-
tected by the IR sensor in the slide gate. The result is
that the shutter will not open.

2. Light on the screen

Tray replacement is easier done if the room is not
totally dark. You will appreciate to have light on the
screen.

Summary of Contents for EKTAPRO 7000














































































Search results

Summary of Contents for EKTAPRO 7000

Reviews:

Related manuals for EKTAPRO 7000

Brands by name

Popular brands

Kodak EKTAPRO 7000, Quick Reference Manual

Search results

Summary of Contents for EKTAPRO 7000

Reviews:

Related manuals for EKTAPRO 7000

Brands by name

Popular brands