Kodak EKTAPRO 7000 Quick Reference Manual Download Page 4

Page: 4 / 77

Quick Reference -- The ultimate reference for Kodak

EKTAPRO

Slide Projectors



by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5

50 FAQs

Compatibility
1.

: I still own lenses with spiral rack for my old Kodak S-AV projectors. Can I use these for the

Kodak EKTAPROs as well?

PAGE

I would like to install an EKTAPRO in an auditorium/conference room. Is it possible to

use the 6 pole cable of the speaker’s desk for controlling the EKTAPRO?

PAGE

: I would like to take my EKTAPRO projector when I travel internationally. Is there anything

I need to consider?

PAGE

I had a slide show programmed in Germany and would like to show it in the U.S.A. What

do I need to consider?

PAGE

Slide Trays/Transport
5.

Since I make very many presentations, using the 140 slide tray seems very reasonable.

What are the differences between the 140 and the 80 slide tray?

PAGE

I already projected several slides. How can I take the slide tray off quickly?

PAGE

: I would like to tilt the projector for a special application. What do I need to consider?

PAGE

Sometimes it is hard to put the slide tray onto the projector. What do I need to

consider?

PAGE

I would like to project slides endless with built-in timer. Anything to consider?

PAGE

10. Q

: I would like to show several slides in continuous operation with built-in timer. After the last

slide has been projected, I want the slide tray to go back to 0-position and show the first slide
again. What do I do?

PAGE

11. Q:

I have an Ektapro without built-in timer. How can I make an automatic slide change

anyhow?

PAGES

19 - 21

Autofocus
12. Q:

Even though the AF is on, I feel like the slides are not focussed

PAGE

13. Q:

The AF does not always work with my 4 x 4 slides. Why is that?

PAGE

Control
14. Q:

I was able to control my old S-AV projectors via an AV tape recorder. Does this work

with the EKTAPROs as well?

PAGE

15. Q:

I would like to turn the projector on and off via the power switch. However, I don’t want

the slide tray to go into 0-position. I would like to continue with the last slide that had been
shown

PAGE

Summary of Contents for EKTAPRO 7000














































































Search results

Summary of Contents for EKTAPRO 7000

Reviews:

Kodak EKTAPRO 7000, Quick Reference Manual, Page: 4 / 77

Search results

Summary of Contents for EKTAPRO 7000

Reviews: