Warnings and Cautions
88
Contents
Back
Next
Index
Warnings and Cautions
!
To prevent fire or shock hazard, use only the
recommended accessories and attachments.
!
Use only the power source type indicated on
the name plate of the AC adapter. A line
voltage outside this range can destroy the AC
adapter and/or the DCS Pro Back Plus.
!
Do not substitute other types of cables for
supplied cables or cables listed in the System
Requirements section
(page 12)
.
!
Do not remove a CF Card from the camera,
disconnect or turn off a battery supply, or
disable the AC adapter while the Card Busy
LED inside the Card door is blinking. The
blinking indicates that data is being read from
or written to the card. You may lose data if you
remove a card at this time.
!
Use extreme care when handling CF Cards as
they are easily damaged. If dropped, the CF
Card may be destroyed, resulting in the loss of
all data.
!
Do not use the DCS Pro Back Plus where it
can come in contact with water. It is not
waterproof or splash-resistant.
!
Handle the DCS Pro Back Plus with care.
Treat the anti-aliasing filter with the greatest of
care. It is a very expensive device.
!
Retain the safety and operating instructions for
future reference. Retain the packing case for
use if your camera needs to be shipped.
!
Treat the imager with extreme care. It is very
expensive to replace.
!
The anti-aliasing or IR filter is exposed when
the cap is removed. Do not touch or strike this
filter or set it down on a surface.
