Kodak DCS Pro Back Plus Page 85 User Manual Download

Page: 85 / 105

Unsupported Features

Contents

Back

Next

Index

Unsupported or Partially Supported Features (MAMIYA RZ67 PRO II)

Most camera body features are supported when
the DCS Pro Back Plus is attached. (Refer to the
RZ67 PRO II Instruction Manual by MAMIYA.)
Exceptions are listed below.

Unsupported Camera Body Features

With the DCS Pro Back Plus attached,
shutter speeds greater than 1/4 second are
not supported.

With the DCS Pro Back Plus attached, the
R-M lever must be set to the multiple
exposure (M) position.

Infrared photography is not supported.

With the DCS Pro Back Plus attached, only
a single ISO can be used.

Multiple exposures are not supported.

Before You Begin

Summary of Contents for DCS Pro Back Plus










































































































Search results

Summary of Contents for DCS Pro Back Plus

Reviews:

Related manuals for DCS Pro Back Plus

Brands by name

Popular brands

Kodak DCS Pro Back Plus, User Manual

Search results

Summary of Contents for DCS Pro Back Plus

Reviews:

Related manuals for DCS Pro Back Plus

Brands by name

Popular brands