Unsupported Features
84
Contents
Back
Next
Index
Unsupported Features
Unsupported or Partially Supported Features (HASSELBLAD Cameras)
Most camera body features are supported when
the DCS Pro Back Plus is attached. (Refer to the
HASSELBLAD instruction manual.) Exceptions
are listed below.
Unsupported Camera Body Features
!
When using HASSELBLAD lenses of the
C/CB/CR/CFi and CFE series with the DCS
Pro Back Plus, shutter speeds greater than
1/4 second are not supported.
!
The Mode Selector dial must only be used
in the O (Normal mode) or A (Automatic
mode) positions. When a DCS Pro Back
Plus is installed on a HASSELBLAD
555ELD or 553ELX, the O and A modes are
essentially the same.
!
Infrared photography is not supported.
!
Trigger release commands sent to the
remote control socket on the 555ELD
autowinder are not supported.
!
Multiple exposures are not supported.
!
ISO settings other than 100 are not
supported.
!
The Automatic setting of the 555ELD and
553ELX Mode Selector dial has a frame
rate of about 1 frame/second. The DCS Pro
Back Plus does not support this frame rate.
Accessories
The DCS Pro Back Plus supports most
accessories used by the HASSELBLAD 555ELD.
Exceptions are listed below:
!
HASSELBLAD Prism Viewfinder PM90
!
Meter Prism Viewfinder PME90
