Kodak DCS 300 Series User Manual Download Page 38

Page: 38 / 256

1-26

Attaching the Hand Strap

A hand strap is included with your camera.

Thread the strap through the
hand strap pad.

Place the strap through the
camera’s top and bottom strap
fixtures.

Thread both ends of the strap
back through the loops on the
hand strap pad.

Place the two-holed buckle on
the top strap.

Tuck the top strap through the
bottom loop in the hand strap
pad.

Thread the bottom strap through
the two-holed buckle as shown.

Tuck the bottom strap through
the top loop in the hand strap
pad.

☛

Ensure that the strap is secure
before relying on it to carry the
camera.

Summary of Contents for DCS 300 Series

































































































































































































































































Search results

Summary of Contents for DCS 300 Series

Reviews:

Related manuals for DCS 300 Series

Brands by name

Popular brands

Kodak DCS 300 Series, User Manual

Search results

Summary of Contents for DCS 300 Series

Reviews:

Related manuals for DCS 300 Series

Brands by name

Popular brands