Kodak DC265 User Manual Download Page 73

Page: 73 / 146

5-5

Connect

ing

Checking for RS-232 serial support

Although not as fast (maximum data transfer rate of 115 kb per second), an RS-
232 serial connection is supported by the vast majority of computers. The serial
port option is available on WINDOWS 95, WINDOWS 98, and WINDOWS NT
4.0 Operating Systems.

RS-232 connectors are the standard ports located on the back of the computer.
They are usually labeled A and B.

To determine if your computer supports an RS-232 serial connection
(WINDOWS 95, WINDOWS 98):

Right-click the My Computer icon.

Click on Properties in the pop-up menu.

Click the Device Manager tab.

Double-click on the Ports device in the displayed list.

Verify that there is at least one Communication Port.

If at least one Communications Port is present, your computer supports an
RS-232 Serial connection.

To determine if your computer supports an RS-232 serial connection
(WINDOWS NT 4.0):

Click Start

➔

Settings

➔

Control Panel

Click on Ports.

Click the Device Manager tab.

Verify that there is at least one Communication Port.

If at least one Communication Port is present, your computer supports an
RS-232 Serial connection.

Summary of Contents for DC265



















































































































































Search results

Summary of Contents for DC265

Reviews:

Kodak DC265, User Manual, Page: 73 / 146

Search results

Summary of Contents for DC265

Reviews: