10-6
Corrupted Image message is
displayed on the Color LCD
while in the Review mode.
Important: While in the
Capture mode, the thumbnail
appeared normal.
The memory card was
ejected during
processing.
The picture must be
retaken.
Batteries are too low
to complete
processing.
Replace the batteries or
use the AC Adapter.
The picture must be
retaken.
Shutter button does not work.
Camera is not turned
on.
Turn the camera on and
verify that the green
Ready light turns on.
Mode dial is not set to
Capture.
Set the Mode dial to
Capture.
Ready light is
blinking. Camera is
processing picture.
Wait until Ready light
stops blinking before
attempting to take
another picture.
The Status Display
reads Full. The
memory card is full.
Transfer pictures to
your computer or
change the memory
card.
Camera does not turn on.
Batteries are not
installed properly.
Remove the batteries
and install them
according to the
directions on the inside
of the battery door.
Batteries are weak or
depleted.
Install new batteries or
use the AC adapter.
Part of the picture is missing.
Something was
blocking the lens
when the picture was
taken.
Keep hands, fingers, or
other objects away
from the lens when
taking pictures.
Your eye or the
picture was not
centered correctly in
the viewfinder.
Leave space around
subject when centering
picture in viewfinder.
Troubleshooting
Problem
Cause
Solution
