11.
Connect the HUMIDITY SENSOR to the small CONNECTOR on PCB A16. See
figure 1-8.
12.
Connect the brown PLUG from the WATER LEVEL SWITCH to the brown PLUG of
the HUMIDIFIER HARNESS.
13.
Connect the 2 large FLAT TAB CONNECTORS from the HUMIDIFIER HARNESS to
the outer TWIN WATER VALVE.
NOTE
Only 1 side of the TWIN WATER VALVE is used. The other one must be closed properly. To store less spare
parts, the TWIN WATER VALVE from the XML300 is used in the ML2000P too.
T h i s s i d e o f t h e T W I N W A T E R V A L V E
m u s t b e c l o s e d .
Connect the 2 large
FLAT TAB CONNECTORS
to the outer TWIN WATER VALVE
figure 1-9
II 3477-D
HUMIDIFIER ML2000 P
INSTALLATION INSTRUCTIONS
KODAK AG, Stuttgart
1-9
11/1997