Kobold NRM, Operating Manual

Page: 35 / 52

NRM
NRM K06/0422 page 35
16. Order Codes
Compact version (Example: NRM-4 A P R80 00 0 )
Model
Antenna/
measuring range
Material antenna/
housing
Process connection
Output/version/
approval
Options
NRM-4
A = horn antenna
DN40, 1½“ /
(0.2 … 18 m)
P
2)4)
= PP/PBT
M = 1.4571/ PBT
S = 1.4571/ aluminum
(coated)
K = 1.4571/ st. steel
R80 = BSP
R8P 2) = BSP connection with
PP enclosure
R8T
2)
= BSP connection with
PTFE enclosure
N80 = NPT
N8P
2)
= NPT connection with
PP enclosure
N8T 2) = NPT connection with
PTFE enclosure
T9T
2)
= TriClamp 2“ (1.4571)
with PTFE enclosure
C9T
2) = Pipe coupling DN50
(1.4571) with PTFE
enclosure
00 = 4-20 mA HART / without
display/ without
0A =4-20 mA HART / without
display / ATEX
0I =4-20 mA HART / without
display / IECEx
H0
1)
= 4-20 mA HART / without
display (high temp.)/ without
HA 1) = 4-20 mA HART / without
display (high temp.)/ ATEX
HI
1)
= 4-20 mA HART / without
display (high temp.)/ IECEx
10 = 4-20 mA HART / with display
/ without
1A = 4-20 mA HART / with display
/ ATEX
1I = 4-20 mA HART / with display/
IECEx
D0 1) = 4-20 mA HART / with
display (high temp.)/ without
DA 1) = 4-20 mA HART / with
display (high temp.) / ATEX
DI
1)
= 4-20 mA HART / with
display (high temp.) / IECEx
0 = without
Y
2)
= special
version
(acc. to
description)
B = horn antenna
DN50, 2“ /
(0.2 … 23 m)
R90 = BSP
R9P 2) = BSP connection with
PP enclosure
R9T
2)
= BSP connection with
PTFE enclosure
N90 = NPT
N9P
2)
= NPT connection with
PP enclosure
N9T 2) = NPT connection with
PTFE enclosure
C = horn antenna
DN80, 3“ /
(0.2 … 23 m)
M= 1.4571/ PBT
S=
1.4571/ aluminum
(coated)
K=
1.4571/ st. steel
FBE = DN80 PN25 1.4571
FCE = DN100 PN25 1.4571
FEE = DN150 PN25 1.4571
FBP 3) = DN80 PP (PN25)
FCP
3)
= DN100 PP (PN25)
ABE = 3“ RF 150 psi 1.4571
ACE = 4“ RF 150 psi 1.4571
ABP 3) = 3“ RF PP (150 psi)
ACP 3) = 4“ RF PP (150 psi)
JBE = JIS 10K 80A 1.4571
JCE = JIS 10K 100A 1.4571
JBP
3)
= JIS 80A PP (10K)
JCP 3) = JIS 100A PP (10K)
D = parabolic
antenna DN150, 6“ /
(0.4 … 23 m)
FEE = DN150 PN25 1.4571
FEP
3)
= DN150 PP (PN25)
AEE = 6“ RF 150 psi 1.4571
AEP 3) = 6“ RF PP (150 psi)
JEE = JIS 10K 150A 1.4571
JEP
3)
= JIS 150A PP (10K)
1) Only possible with material combination „S“ or „K“; not available with PP enclosure
2) Not available for Ex-version
3) Hole pattern as per specification in brackets (xx): p
max
is 3 bar
4) Only in combination with process connection “xxP”