Kobold NRM, Operating Manual

Page: 16 / 52

NRM
page 16 NRM K06/0422
8.1.3 Echo map
Pressing the button in the measurement
screen the echo map screen will appear. This
screen shows the following information:
1. Echo diagram
2. Actual measured distance
3. Maximal measuring range
The echo map screen returns back to main
screen after 30 seconds.
By pressing the button the user can return to
the main screen any time. Pressing the
E
button
in any of the screens the user can enter main
menu. After exiting the menu always the main
screen will be shown.
8.2 Programming with the NRM-300P display module
When entering the menu the instrument makes a copy of the actual parameters
and all changes are done to this duplicated parameter set. During programming the
instrument keeps measuring and transmitting with the current (and intact)
parameter set. After exiting the menu the instrument replaces the original
parameters with the new parameter set and will measure according to the new
parameters. This means that the change of the parameters does not become
immediately effective when pressing the
E
button!
Entering the menu can be done by pressing the
E
button, while exiting the menu
can be done by pressing the button.
If the instrument is left in programming mode after 30 minutes it will automatically
return to measuring mode. If the NRM-300P display is removed during
programming the instrument immediately returns to measuring mode.
As programming with NRM-300P (manual programming) and HART (remote mode)
programming is not possible at the same time, only one programming method
could be chosen. Measured values can be read out through HART at any time.
8.2.1 Components of the programming interface
The parameters of the instrument are grouped according to their functions. The
programming interface consists of lists, dialog windows, edit windows and report
windows.