Heinrichs Messtechnik GmbH
OPERATING MANUAL TMU-W / UMC4
Page 7 of 118
2.
Steps prior to operation
It is essential that you read these operating instructions before installing and
operating the device. The device is to be installed and serviced by a qualified
technician only. The UMC4 transmitter is to be used exclusively to measure mass
and volume flow, as well as liquid and gas density and temperature, in conjunction
with a Heinrichs Messtechnik TM, TME, TMR, TMU, TM-SH or HPC sensor.
Downloading of the present document from our web site
and printing out this
document is allowed only for the purposes of using our mass flowmeters. All rights reserved. No
instructions, wiring diagrams, and/or supplied software, or any portion thereof, may be produced, stored,
in a retrieval system or transmitted by any means, electronic, mechanical, photocopying or otherwise,
without the prior written permission of Heinrichs Messtechnik GmbH.
Although the materials in the present document were prepared with extreme care, errors cannot be
ruled out. Hence, neither the company, the programmer nor the author can be held legally or otherwise
responsible for any erroneous information and/or any loss or damage arising from the use of the
information enclosed.
Heinrichs Messtechnik GmbH extends no express or implied warranty in regard to the applicability of the
present document for any purpose other than that described.
We plan to optimize and improve the products described and in so doing will incorporate not only our
own ideas but also, and in particular, any suggestions for improvement made by our customers. If you
feel that there is any way in which our products could be improved, please send your suggestions to the
following address:
Company:
Heinrichs Messtechnik GmbH
HM-EE (R&D Department)
Robert-Perthel-Strasse 9
D-50739 Cologne
Germany
or:
via fax :
+49 (221) 49708-178
via email:
Note:
We reserve the right to change the technical data in this manual in the light of any
technical progress that might be made.
For updates regarding this product, visit our website at
, where you
will also find contact information for the Heinrichs Messtechnik distributor nearest you.
For information regarding our own sales operations, contact us at
