Kobalt K18ND-06A Manual Download

Page: 56 / 79

SAFETY INFORMATION

Carefully read this manual and all labels affixed to the battery
pack before using. Keep this manual available for future
reference.

IMPORTANT

!
technician.

READ ALL INSTRUCTIONS THOROUGHLY.

GENERAL SAFETY RULES FOR ALL POWER TOOLS

WARNING: Read all safety warnings and all instructions.

Failure to follow all warnings and instructions may result in
! "

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
power tool.

Work area safety

Keep the work area clean and well-lit.

Cluttered and dark

areas invite accidents.

Do not operate power tools in explosive atmospheres,

dust.

Power tools create sparks which may ignite the dust

or fumes.

Keep children and bystanders away while operating a
power tool.

Distractions can cause you to lose control.

Summary of Contents for K18ND-06A
















































































Search results

Summary of Contents for K18ND-06A

Reviews:

Related manuals for K18ND-06A

Brands by name

Popular brands

Kobalt K18ND-06A, Manual

Search results

Summary of Contents for K18ND-06A

Reviews:

Related manuals for K18ND-06A

Brands by name

Popular brands