Kobalt K18ND-06A Manual Download Page 69

Page: 69 / 79

SAFETY INFORMATION

Personal safety:

> Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

alcohol or medication.

A moment of inattention while

% "

protection.

Protective equipment such as a dust mask,

non-skid safety shoes, hard hat, or hearing protection, used
% "

> Prevent unintentional starting. Ensure that the switch

is in the off-position before connecting to a power
source and/or battery pack, picking up or carrying the
tool.

' % % %

* % %
accidents.

> Remove any adjusting key or wrench before turning the

power tool on.

A wrench or a key left attached to a rotating

% "

> Do not overreach. Keep proper footing and balance at

all times.

This enables better control of the power tool in

unexpected situations.

> Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves away
from moving parts.

: "%

hair can be caught in moving parts.

> If devices are provided for the connection of dust-

extraction and collection facilities, ensure that these are
connected and properly used.

Use of these devices can

; *

Summary of Contents for K18ND-06A
















































































Search results

Summary of Contents for K18ND-06A

Reviews:

Brands by name

Popular brands

Kobalt K18ND-06A, Manual

Search results

Summary of Contents for K18ND-06A

Reviews:

Brands by name

Popular brands