22
Parameter setting
Sensor KNX AQS-UP basic
• from software 3.1 • Status: 24.03.2016 • Technical changes reserved. Errors reserved.
Behaviour on release of the switching output is dependent on send behaviour
4.7.2. AND logic connection inputs
do not use
Logic input 1
Logic input 1 inverted
Logic input 2
Logic input 2 inverted
Logic input 3
Logic input 3 inverted
Logic input 4
Logic input 4 inverted
Logic input 5
Logic input 5 inverted
Logic input 6
Logic input 6 inverted
Logic input 7
Logic input 7 inverted
Logic input 8
Logic input 8 inverted
Logic input 9
Logic input 9 inverted
Behaviour of the switching output
With blocking
• do not send message
• send value for logic = 0
• send value for logic = 1
Value of the parameter
"Send behaviour":
Settings options
"Behaviour of the switching output on
release":
on change of logic
• do not send message
• send value for current logic status
on change of logic to 1
• do not send message
• if logic = 1
send value for 1
on change of logic to 0
• do not send message
• if logic = 0
send value for 0
on change of logic and periodically
send value for current logic status
(no selection)
on change of logic to 1 and periodically
if logic = 1
send value for 1
(no selection)
on change of logic to 0 and periodically
if logic = 0
send value for 0
(no selection)
on change of logic and receipt of object
• do not send message
• Status object/s send/s
on change of logic and receipt of object
and periodically
send value for current logic status
(no selection)
