5
TOOLS NEEDED FOR ASSEMBLY
SUPPLIED
NOT SUPPLIED
3 mm hex key
Slotted screwdriver
#2 Phillips screwdriver
Adjustable wrench
13 mm wrench
CARTON CONTENTS
A. Scroll saw
assembly
B. Blade bag
- 5 in. pin-end blade
- 3 mm hex key
C. Side bracket
- Upper supports
D. Side bracket
- lower supports
E. Rear bracket
- upper & lower
supports
G. Stand hardware bag
F. Front bracket
- upper & lower
supports
H. Stand leg
(front)
I. Stand leg
(rear)
1. Carefully unpack the scroll saw
and all its parts, and compare
against the list below and
the illustration.
2. With the help of an assistant,
place the saw on a secure
surface and examine it carefully.
• To avoid injury from unexpected starting or electrical shock,
do not plug the power cord into a source of power during unpacking and
assembly. The cord must remain unplugged whenever you are adjusting/ assembling
the scroll saw.
• The scroll saw is heavy and should be lifted with care. If needed, get the
assistance of someone to lift and move the scroll saw.
• If any part is missing or damaged, do not attempt to assemble the scroll saw,
or plug in the power cord until the missing or damaged part is correctly replaced.
WARNING