0900455 Rev: F (06/02)
Page 7 of 20
Allows you to choose the desired formula (unless using RELAY
mode) for operation. When programming the system, allows you to
navigate through the various menu selections.
Allows you to move (SCROLL) the cursor position left or right within
certain menu selections to choose items you wish to change. Also
acts as YES or NO when prompted for a yes/no response within a
menu selection.
INCreases or DECreases the value of a particular character (i.e.
pump number, formula name, etc). A blinking “cursor” indicates
which character will be changed by these buttons. Press repeatedly
to advance through all available letters and numbers.
Locks you out from access when finished programming. From any
selection within a menu, RESET will take you back to that menu’s
heading. Can also be used to halt pump operation and to reset the
drain count. (When using Drain Mode)
Allows you to access the system from the main (default) display.
Takes you into the menus for programming. Logs data into memory
when programming.
Shows load counts in the display window. Press once to show
total
load counts for all formulas, or relay mode. Press repeatedly to
advance through individual load counts for each formula (individual
load counts do not apply to relay mode). Press MENU
to return to
the default display when finished viewing load counts.
Note: Load counts are cleared in menu 4.
Allows you to enable or disable the bleach defeat function. When
enabled, the “bleach defeat” pump (see DISPENSER SETUP menu
for details) will bypass operation until the load count pump is
signaled. This feature also works in relay mode, and Drain Mode.
DISPLAY WINDOW
KEYPAD DIAGRAM
