Page 4 of 20
0900455 Rev: F (06/02)
INTRODUCTION
Please read this manual before attempting to program the dispenser — it will save you time.
The Multi-Flow dispenser features a user-friendly remote control, 16 formula capability, and available pump flow
rates of 8 oz/min, 23 oz/min, 40 oz/min, 155 oz/min and 226 oz/min. Many other outstanding features, including
integrated Flush mode, Drain mode, Relay mode and automatic programming, make this dispenser a good choice
for any small or large volume laundry.
Before connecting signal wires to the Multi-Flow, always check the schematic of the washwheel controller. These
schematics can be obtained in the instruction manual of the machine or by the machine manufacturer.
SYSTEM OVERVIEW
The Multi-Flow is a two component system, with each component performing a specific function. The circuit board
located inside the pump housing, receives the supply signals from the washmachine. Signals are then routed to the
Remote (hand-held) Control, which is responsible for all timing and programming functions. Pump run times and
delay times are activated, based on what formula number has been selected — the pumps then run for the correct
amount of time (or volume). Accessories for installation and other optional components, such as flush manifolds, are
available. Contact your nearest Knight location for details.
