Operating Instructions LIQUIPORT EN
Installation and initial start-up
KNF Flodos | BA_LIQUIPORT_EN_11_153820.docx | Translation of original operating instructions, English
29
Use of internal threads
1
Connector
2
Teflon sealing tape
Fig. 13: Internal thread NPT 1/8"
Pump type
Internal thread
LIQUIPORT 100
LIQUIPORT 1.100
NPT 1/8"
LIQUIPORT 300
LIQUIPORT 1.300
NPT 3/8"
Tab. 13: Internal thread
Remove protective cap and screwed-in connectors from the con-
nections.
Prepare required fitting with corresponding external thread with
suitable sealant (e.g. Teflon sealing tape).
Screw in fitting and tighten.
Check that the fitting is fitted correctly and securely.
Check that the system is leak-tight.
Summary of Contents for LIQUIPORT 1.100
Page 48: ...www knf com...
