Technical data
Operating Instructions LIQUIPORT EN
18
KNF Flodos | BA_LIQUIPORT_EN_11_153820.docx | Translation of original operating instructions, English
3.6 Installation location requirements
The pump is designed to be operated in an upright position.
NOTE
An unsuitable location may cause damage to the device
-
Install in a dry place
-
Protect the installation location of the pump from water in
the form of rain, spray, splashes and drips
-
Do not operate the pump in an aggressive or flammable en-
vironment
-
Choose a safe location (a level, flat surface) for the pump
-
Place the pump in a suitable collecting pan
-
If the stability of the pump cannot be ensured, fasten the
pump in place using two screws
-
Make sure that the hose connections can be fitted without
strain on the hoses
-
Protect the pump against shocks, impacts and strong vibra-
tions
3.7 Electrical connections and performance data
Pump type
LIQUIPORT
100
LIQUIPORT
1.100
Nominal mains voltage [V]
100
– 240V AC +/- 10%,
Frequency [Hz]
50-60 Hz
Max. power consumption AC
100 V / 115 V / 240 V
[W]
12 / 12 / 12
15 / 15 / 16
Max. power consumption DC [W]
12
15
Pump DC voltage [V]
24V DC
Maximum operating current, DC
RMS 24 V [A]
0.5
0.63
Max. short-term peak current [A]
0.8
0.8
Power supply fuse
Electronic overload protection
Pump fuse
Electronic overload protection
Tab. 5: Electrical data LIQUIPORT 100
Pump type
LIQUIPORT
300
LIQUIPORT
1.300
Nominal mains voltage [V]
100
– 240V AC +/- 10%,
Frequency [Hz]
50-60 Hz
Max. power consumption AC
100 V / 115 V / 240 V
[W]
22 / 22 / 24
30 / 30 / 32
Max. power consumption DC [W]
22
29
Pump DC voltage [V]
24V DC
Maximum operating current, DC
RMS 24 V [A]
0.92
1.2
Max. short-term peak current [A]
1.3
1.3
Power supply fuse
Electronic overload protection
Pump fuse
Electronic overload protection
Tab. 6: Electrical data LIQUIPORT 300
Summary of Contents for LIQUIPORT 1.100
Page 48: ...www knf com...