Operating Instructions LIQUIPORT EN
Technical data
KNF Flodos | BA_LIQUIPORT_EN_11_153820.docx | Translation of original operating instructions, English
23
3.12 Transferred medium
Parameter
Value
Permissible medium viscosity [cSt]
150
Ideally free of solids, max. particle size [µm]
< 70
Permissible media temperature
1
[°C]
+5 to +80
WARNING
Poisoning and caustic burns
If corrosive, poisonous, ionising or biological media come into contact
with skin, eyes and the respiratory tract they may cause serious inju-
ries
-
Observe the safety data sheets for the media to be trans-
ferred
-
Use personal protective equipment
-
Operate the pump in a suitably protected area
-
Check the resistance of any parts which come into contact
with the fluid (see chemical resistance list or consult your local
KNF dealer)
WARNING
Damage caused by ionising radiation
Radioactive materials cause serious damage to health and reduce the
service life of the pump.
-
Decontaminate the pump
-
Wear personal protective equipment
-
Mark the pump
NOTE
If the absence of solid material in the pumped material is not en-
sured, a filter < 70 µm with a sufficiently large filtration surface area
must be installed upstream of the pump in order to prevent damage
to the pump.
NOTE
Before using a medium, check the compatibility of the materials of
the pump head, pump housing, diaphragm and valves with the me-
dium.
-
Check the resistance, see the resistance list
-
Clarify resistance with KNF
1
Applies to water and low-reactivity media. For aggressive media, re-
sistance is to be checked at a higher medium temperature.
Summary of Contents for LIQUIPORT 1.100
Page 48: ...www knf com...
