29
Figure 7-8
Setting the coolant supply
2
1
7.6 Configuring the coolant supply
The coolant pump is switched on and off by press-
ing the “Coolant On / Off” (3-5/3) button while
the controller is activated. The coolant supply is
regulated using the coolant tap (7-8/1).
The coolant supply is throttled by turning the
coolant tap clockwise. Turning it counterclock-
wise opens the coolant tap and thus the coolant
supply.
The coolant hose (7-8/2) is flexible and must be
configured so that the coolant flows directly onto
the workpiece.
ATTENTION
When grinding, make sure that the work-
piece is always provided with sufficient
coolant, otherwise the workpiece may over-
heat, thus damaging the metal structure of
the workpiece. Check the coolant level before
grinding.
7. Operation
