27
7.4 Workpiece mounting with centering piece
The grinding unit can be moved back in order to
insert the workpiece.
For this purpose, pull out the locking handle (7-
4/1) and push the slide back as far as it will go
using the grab handle (7-4/2).
After this, lock the grinding unit once again.
The workpieces are mounted and correctly aligned
on the rotary table by means of centering pieces
(7-5/1) and the follower (7-5/2). The correspond-
ing centering piece is placed in the bore at the
center of the rotary table.
The follower is used to attach smaller workpieces
on the rotary table.
7. Operation
Figure 7-4
Moving the grinding unit into the
change position
Figure 7-5
Centering piece and follower
1
2
2
1
